JHL-3018 is a white marble design for the AB glue, not only anti-yellowing performance is excellent, the focus can reduce the watermark.
Product Features：
◆ Very low watermark.
◆ anti-yellowing good performance.
◆ Especially suitable for dispensing and brushing of white board.
The main technical and performance parameters:
project | Typical values | |
Exterior | A | Colorless transparent liquid |
B | Colorless transparent liquid | |
Viscosity | A | 500~700cpas |
B | 500~750cpas | |
Mixing ratio A: B | 4∶1 | |
100 g cup gel time | 20~25 | |
25 ℃ curing time table dry / hard work | 2.5h/4.5h/18h | |
Solid content | ≥95 | |
Product use method:
◆ Sizing should be kept dry, there is no obvious water stains, dust and oil, such as a drying line has been built, for a short time drying, and other stone drying after coating.
◆ A component and B component in accordance with the A: B = 4: 1 to deploy even cash now, in 10-15 min to complete.
◆ glue layer surface dry, either stacked, the next process, grinding and polishing, to be such a layer of hard work.
Product use Note:
◆ The sizing of the strains should be completely according to the weight ratio of A: B = 4: 1 ratio of deployment to ensure the best coating the best results.
◆ Prohibited A, B ratio cup mixed use, should be used immediately after a good glue bottle.
◆ A, B glue must be mixed evenly, so as not to affect the use of results.
◆ a plastic should not be too much time, the amount of plastic may be due to fast response and the filling period is slightly shortened, a good tune the glue must be used within the period of use (start to become hot or sticky can not be used, so as not to affect Penetration and cohesion), the deployment of a good plastic should be a one-time run out.
◆ For color, color paste to join the A glue, but the amount should not be too much, it is best to use a dedicated epoxy paste, so as not to affect the bonding effect.
◆ Keep the construction site well ventilated, do the necessary labor protection, if accidentally splashed into the eye glue, the first rinse with plenty of water, seek medical attention immediately.
Packaging, transportation and storage:
1, packaging 25KG iron or plastic packaging specifications.
2, the transport process should be rain, sun, to prevent damage to the packaging, moisture.
3, stored in a cool dry place, away from fire, strong acid, alkali and strong oxidants.
4, in accordance with the provisions of the transport and storage conditions, from the date of production from the storage period of 6 months.
5, JHL-3018 for non-dangerous goods, according to the general merchandise disposal.
6, the color is gradually deepening during storage is a normal phenomenon, does not affect the use of results. After opening the use of packaging barrels should be tightly closed lid, to avoid long-term exposure to air.
Special Note:
The Company of the above data and text description are from sincerity, but I do not know whether it is suitable for your company's construction technology and use. Therefore, please use this product before the samples from the Company to obtain the test, if you have any questions, please feel free to contact the Company.
Service Hotline:
0596-7667838
Current location:
